HP DAT 40 20/40GB SCSI Internal Tape Drive, OEM
Specification
Mfr Part Number: EB650B#000 OEM
Capacity: Native - 20GB; Compressed - 40GB
Buffer Size: 8 MB
Sustained Transfer Rate: Native - 3.2MB/s; Compressed - 6.4MB/s
Burst Transfer Rate: Asynchronous - 6.4MB/s; Synchronous - 160MB/s
Data Access Time: 50 s
Average Load Time: 15 s
Average Unload Time: 15 s
Rewind Time: 110 s (end to end)
Rewind Tape Speed: 1.41 m/s
Recording Method: 4mm Helical Scan
Recording Format: DDS-4, DDS-3, and DDS-2 (ANSI/ISO/ECMA)
Data Compression: Lempel-Ziv (DCLZ)
Error Detection/Correction: Reed-Solomon
Data Encoding Method: Partial Response Maximum Likelihood (PRML)
Interface: SCSI-3 Ultra 160 LVD
SCSI Connector:
Internal: 68pin wide HD LVD
External: 68pin wide HDLVD, thumbscrew
Hot-plug: 80pin SCA-2 (SCSI and power)
Array module: 80pin EBBI
Media: Recommended- DDS-4 (155m); Backward read-write compatibility- DDS-3 (125m), DDS-2 (120m)
Power Requirements: +5V ±5% (100mV Max ripple) @ 0.6A; +12V ±10% (150mV Max ripple) @ 1.2A
Power consumption: 7.3 W
Standards Compliance: cCSAus Certification to C22.2, No. 60950, TÜV EN60950 (IEC 60950), FCC and CE Declaration of Conformity, C-TICK Approved (AS/NZS CISPR22), VCCI Approved, RRL Approved, BSMI Approved, GOSH Approved
MTBF: 125,000 hours at 100% duty cycle
Uncorrected Error Rate: 1x 10-17 bits read
Form Factor: 5.25" Half-height
Dimensions (WxDxH): 5.7 x 6.1 x 1.6 inch / 14.5 x 15.5 x 4 cm
Weight: 2.1 lbs / 0.95 kg